Annie Sloan’s new Chalk Paint™ Lacquer gives a hard wearing protective finish which is suitable for either indoors or outside.It has been especially developed for use with Chalk Paint™. Annie Sloan Chalk Paint Lacquer includes an in built UV protection to keep colours vibrant when used outdoors. It is low in VOCs and is also certified as toy safe. The lacquer is available in either matt or gloss finish and can be applied by brush, roller or spray gun.
Annie Sloan recommends her Chalk Paint™ Lacquer to protect floors, outdoor furniture and kitchen units. Remember! Do not apply Lacquer over a waxed surface. Be sure to always test an area with paint and lacquer before you begin as results can vary depending on previous treatments. Always stir the lacquer well before using and regularly during use. Don’t over brush. Each tin will cover up to 19 m². Use a high quality brush or roller and apply methodically. Annie’s top tip is to dilute the lacquer with 10% water when applying over Chalk Paint™ for a more even finish.
Curing time for maximum protection takes 14 days but the lacquer should be touch dry and ready for a second application after 2 – 24 hours.
Outdoor use. Apply at least two thin coats to ensure full coverage – any parts you miss will be susceptible to water ingress, which could then cause the Chalk Paint™ underneath to peel over time. Annie recommends storing your up-cycled furniture indoors or undercover in the winter to prolong the life of the finish.
Aftercare Immediately wash your brushes or rollers in warm soapy water. To protect Chalk Paint™ Lacquer finished furniture, clean with a damp cloth using mild soapy water. Avoid regular use of harsh chemicals. Store left over Chalk Paint™ Lacquer in a cool dry place and maximise shelf life by decanting tins that are less than half full into smaller, air tight containers. For best results use Chalk Paint™ Lacquer within one year of purchase.
* Use Matt and Gloss Chalk Paint™ Lacquer side by side to create textural contrast and interest!
* Floss finishes are generally more robust than matt – for an extra durable finish, apply 1-2 coats of Gloss followed by one of Matt.
* Cloudiness – Use Matt Lacquer sparingly over dark colours, as a build up of product can cause the flattening agents in the Matt Lacquer to give a
white haze to the finish.
*Bleed through – Wood surfaces can be unpredictable. The application of Lacquer can draw out tannins or stains from a previous finish,causing
yellowing. Patch test before painting the entire piece – if staining occurs seal the whole surface of your furniture with shellac or another stain blocker ahead of painting. Chalk Paint™ Lacquer can sometimes work as a sealant. Test first!
